Focusing the T-axis and framing the sample on the XY stage are both done
by eye, but the controls were in the main window and the T3R panel, so
the operator had to look away from the video to move anything.
Adds gui/jog_panel.py with two panels, laid out in a column to the right
of the camera image:
T3RJogPanel per-axis enable, hold-to-jog ◀/▶, live position, and a
per-channel microstep combo (SET_MICROSTEP is per channel
on this controller). Jog velocity and acceleration are
shared by the four axes.
BBDJogPanel an X/Y jog pad, step size, and velocity/acceleration.
The stage runs closed-loop servos, so there is no
microstepping to set — the panel says so rather than
offering a control that does nothing.
The T3R's JOG is a continuous velocity move, so the button holds it and
the release stops it; the BBD has no such command, so a held button
repeats a short relative move the way the main window already does.
Only axes this panel started are ever stopped — closing the window or
hitting "Stop jogging" can't cut a scan's rotation short.
Both panels take the driver and worker the main window already owns, so
a jog here is the same command as a jog there. The BBD202 worker grows
a set_velocity command, and its jog now carries the step with it instead
of the caller writing _jog_step onto the worker from the GUI thread.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
A full multi-angle scan takes hours, and a rig whose angles disagree produces
all of them before anyone finds out. This adds a test mode that acquires one
row per angle — the row-wise middle of the ROI — and a viewer that puts every
angle's SAW frequency on one graph. The default 80×50 mm ROI at 5 angles goes
from 1461 rows to 5.
Why the middle row answers an alignment question at all: build_plan centres
every angle's rotated bounding box on the same nominal ROI centre, so each
angle's middle row crosses that one point on the sample. All the angles
measure the same material, so a spread in their frequencies belongs to the rig
rather than to where each row happened to land. test_every_angles_middle_row_
crosses_the_roi_centre pins that premise, since the whole comparison rests on
it and nothing else in the geometry code would notice it breaking.
core/saw_check.py — both halves of the mode, kept together because neither is
much use alone. middle_row_plan() reduces a ScanPlan to one row per angle
(n_rows // 2, the upper of two centre rows when even); frequency_traces() and
alignment_summary() turn the resulting file back into per-angle frequency
traces and the scalars an operator is actually asking about — the spread of
the per-angle medians, the worst drift along a row, the sparsest row. The
verdict thresholds are labelled as rules of thumb, not physics: an anisotropic
sample genuinely varies with angle, so a wide spread is a prompt to look at
the curves rather than a verdict.
Format v10: byte-identical to v6, one row per angle. The version byte earns
its keep because the two are otherwise indistinguishable — a v6 scan aborted
after its first row is not a check, and a reader guessing from the row count
would read a failed scan as a deliberate measurement. create_scan_file()
enforces the one-row rule at write time, since nothing downstream can recover
from a v10 file that breaks it. ScanEngine gains file_version and is otherwise
untouched: the acquisition, the abort/pause path and the background capture
are the scan's, unchanged.
sras_scan_manager.py now carries the source file's version through an export
instead of stamping v6 on everything, which the wider reader would otherwise
have made a lie.
saw_check_viewer.py — frequency along the row, one curve per angle, over a
common offset axis so the curves lie on the same piece of sample; a summary of
each angle's median ±1σ against angle; and the per-angle numbers in a table.
Analysis parameters (DC threshold, background, time gate) recompute on a
worker thread; display ones (smoothing, axis, MHz↔m/s) only redraw. A full v6
scan opens too — the same middle row is pulled out of it — so a finished scan
can be re-examined with the check's own read-out.
In the app, a check finishes by handing the operator the file and an "Open
Viewer" button rather than shutting the rig down the way a completed scan
does. Burst mode is not offered: one row per angle means every burst would be
a single row, so it buys nothing and still pays for the gate preflight.
137 tests passing, ruff clean.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
A 9-angle scan takes hours, and an angle that responds poorly still produces
rows that look structurally fine in the file — the SAW packet is just not
there. This lets the operator walk the angles first, parking the rig at a
random point in each, and judge the response before committing to the run.
Nothing reads the scope. The operator inspects the instrument directly, so
there is no transfer path, no plotting, and no waveform crossing the module
boundary — test_inspection_never_reads_a_waveform_back pins that, since it is
the kind of premise a later change erodes without noticing.
core/scope_inspect.py — the scope state worth looking at, which is not the
scan's state:
- plain rising-edge trigger on CH2 at 2.0 V, not the scan's logic AND of the
laser pulse and the stage gate, so a stationary stage still triggers
- FastFrame off, SAMPLE (no averaging) — a weak or intermittent response is
exactly what is being looked for, and averaging would hide it
- free-running (STOPAfter RUNSTop + STATE RUN) so the trace keeps updating
while the operator looks at it
- CH1 keeps the acquisition front-end verbatim, so what is on screen is what
a scan would record
- CH3/CH4 become bias monitors sharing one scale and position, since the
comparison is by eye and only works if a division means the same on each.
100 mV/div with ground 3.5 divisions below centre puts 0–700 mV on screen
with headroom on an 8- or 10-division graticule (the signal never goes
negative, hence moving the trace down).
core/angle_inspect.py — AngleInspector, headless and Qt-free like ScanEngine.
Points are drawn from the angle's own bounding box: Y from its actual row
positions and X uniformly across its data window, so the point is somewhere
the scan would really sample rather than merely inside the box. New Point
re-rolls without rotating, which is what separates a bad spot on the sample
from a bad angle. The stage gate is held off throughout, and the rotator goes
home on stop.
gui/inspect_bridge.py — QtAngleInspector on the existing QueueWorker base.
Inspection is click-driven rather than one long run, so the worker blocks on
its queue between commands and an open window costs nothing. BBD position
polling is suppressed while inspecting, for the same reason the scan does it:
the shared TX queue.
sc3_aui_app.py — AngleInspectWindow (angle list, prev/next, New Point) driven
off the plan currently entered in the scan panel, so it inspects exactly the
scan about to be run. Navigation locks while the stage moves. The list syncs
via itemClicked rather than currentRowChanged, so echoing the worker's
position back does not re-trigger the move it is reporting.
README picks up the new modules, and scope_burst.py which the previous merge
left out of the structure listing. 114 tests passing, ruff clean.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
- Collapsed Args:/Returns:/Raises: blocks that only restated the
signature (364 lines): tektronix_base 48% -> ~20% doc density,
helios_laser and uc480_camera likewise. Only docstrings whose entire
body was those sections were touched.
- Preserved verbatim the comments that carry hardware knowledge the code
can't express: uc480's USB split-transaction contention note (with its
measured fps), the IS_ALLOW_STARTER_FW_UPLOAD segfault explanation, the
QImage-copy rationale, and tektronix's NUMFRAMESACQuired warning.
- README: project structure, quick start, and every usage example now
describe code that exists (they referenced hardware/bbd202.py,
CoherentHOPSLaser, get_curve_binary, and 'python -m scanengine.app',
none of which do). Added a headless-scan example and a read-a-scan-file
example, since reuse without the GUI is the point of the refactor.
- SETUP: structure section defers to README instead of keeping a second
stale copy; documents the vendored uEye SDK and the Genesis quarantine.
- ruff is now clean repo-wide: fixed the remaining raise-from, unused
loop variables, placeholder f-strings, and a non-strict zip; the
widget-layout semicolon idiom is an explicit config ignore rather than
22 standing warnings.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
- Merged four separate hardware control projects into unified platform
- Created unified requirements.txt with all dependencies
- Added comprehensive .gitignore
- Added project overview README
Co-Authored-By: Claude Sonnet 4.5 <noreply@anthropic.com>
Thomas Ales