Wires the burst_mode flag through QtScanController to ScanEngine and adds a
checkbox to the scan panel. The setting persists via ScanDefaults like the
other scan fields, defaulting to off — per-row acquisition stays the default
path until burst mode has run on the rig and the gate-off preflight has
settled which TRIGOUT value idles the pin low.
scan_format.md — the acquisition settings table had drifted from the code it
claimed to describe: it attributed the settings to sc3_aui_app.py (they moved
to core/scope_sras.py in the Phase 2 extraction), listed a 1.24 V trigger
level and 0 % offset where the code sets 0.500 V and HORizontal:POSition 30,
and did not mention the logic-AND scan trigger at all. Corrected, pointed at
the module that actually owns them, and noted that none of it affects byte
layout — only where the acoustic packet lands inside a frame.
Added an acquisition-paths section: the two paths write byte-identical files
and the choice is a runtime flag that is not recorded in the file, so a
reader never needs to care which produced it. Documents where row boundaries
come from in a burst and that either path squares rows up to n_frames.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
gui/qt_workers.py — one QueueWorker base replaces the per-device command
queue + dispatch + signal boilerplate. The loop blocks on the queue
instead of waking 10-20x/second forever (test_idle_worker_does_not_spin
asserts an idle worker burns ~no CPU). PollingQueueWorker adds
self-rescheduling polling: the next poll is queued only after the
previous finishes, so a device slower than the interval can't accumulate
a backlog (test_polling_never_overlaps_or_backs_up).
Helios responsiveness — the concrete bug that motivated the above: a free
running 1 s QTimer queued a status poll that took ~2 s, so the queue grew
for as long as the panel stayed connected.
- helios_laser._query reads until the CR terminator instead of sleeping a
fixed 0.05 + 0.2 s per query
- one _query_int() helper replaces five copies of parse-with-logging
- polling is now driven by the worker; HeliosWindow's QTimer is gone
- dropped __del__, which disabled the laser and wrote to the serial port
from the garbage collector at an unpredictable time
helios_test_app.py — the worker was moveToThread'd but every call site
invoked its methods directly, so all serial I/O (including the sleeps)
ran on the GUI thread; Query All froze the UI for ~2 s. Calls now go
through a queued signal to a pyqtSlot. Also: connect/disconnect cycles
leaked a QThread + worker + 9 connections each time; 16 copies of the
not-connected guard collapse to _require_connection(); the Query Power
button called a method that has never existed (AttributeError popup) and
is now disabled and documented in KNOWN_ISSUES.
DCBiasImageWidget preallocates its image and uses set_data/set_clim, so
the live preview stops rebuilding the array and the whole artist tree per
row (O(rows^2) over a scan).
bbd20x: connect() now raises when no bays respond instead of reporting
success on the wrong port; disconnect() joins with a timeout so a wedged
reader can't hang shutdown; one _channel_for() helper replaces four
copy-pasted axis mappings; hardcoded travel limits become TRAVEL_MM; the
joke error strings are gone.
gui/widgets.py adds the shared ConnectionBar / PortSelector / bounded
LogConsole / StatusGrid for the test benches to adopt. 65 tests passing.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
The headline of the refactor. Scan orchestration no longer lives inside a
QObject that reaches through Qt workers for its hardware handles.
core/scan_engine.py — ScanEngine(stage, scope, rotator, plan, out_path,
resume, callbacks). Takes the concrete drivers, blocks in run(), reports
via plain callables, and prompts through an injected blocking callable.
No Qt import anywhere in the path (test_engine_imports_without_qt proves
it), so a simpler GUI or a CLI can drive the identical acquisition.
Supporting extractions, all Qt-free:
- core/scope_sras.py — SCPI policy: channel profiles, trigger programming,
background average, per-row FastFrame transfer
- core/rotation.py — RotationAxis + RotationSettings (the GR_* constants)
- core/scan_resume.py — frontier contiguity rule + settings compatibility
- gui/scan_bridge.py — QtScanController, exposing exactly the signal
surface the old ScanWorker had, so MainWindow's connections are unchanged
hardware/t3r_driver.py is now Qt-free: a plain Signal class, a threading
reader, and a polling thread instead of QObject/QThread/QTimer.
gui/qt_t3r.py re-emits its callbacks as queued Qt signals for the panels.
Fixes carried by the extraction:
- rotation waits on the driver's MOTION_DONE event instead of
time.sleep(estimate + 0.5)
- abort during an operator prompt now takes effect; the old
_prompt_event.wait() had no timeout and could not be interrupted
- the poll timer is a thread, so an I/O error tearing down the driver no
longer calls QTimer.stop() from the wrong thread
- T3RDriver.disconnect() renamed close(); it shadowed QObject.disconnect()
- per-frame DC means use np.frombuffer over the joined block instead of
struct.unpack per frame (~16k tuple allocations per row)
tests/fakes.py + test_scan_engine.py (14 tests) assert the exact command
sequence, file layout, resume seeking, abort/pause, and geometry
rejection before any hardware call; test_scan_resume.py covers the
frontier rule. 58 passing.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Thomas Ales