A 9-angle scan takes hours, and an angle that responds poorly still produces
rows that look structurally fine in the file — the SAW packet is just not
there. This lets the operator walk the angles first, parking the rig at a
random point in each, and judge the response before committing to the run.
Nothing reads the scope. The operator inspects the instrument directly, so
there is no transfer path, no plotting, and no waveform crossing the module
boundary — test_inspection_never_reads_a_waveform_back pins that, since it is
the kind of premise a later change erodes without noticing.
core/scope_inspect.py — the scope state worth looking at, which is not the
scan's state:
- plain rising-edge trigger on CH2 at 2.0 V, not the scan's logic AND of the
laser pulse and the stage gate, so a stationary stage still triggers
- FastFrame off, SAMPLE (no averaging) — a weak or intermittent response is
exactly what is being looked for, and averaging would hide it
- free-running (STOPAfter RUNSTop + STATE RUN) so the trace keeps updating
while the operator looks at it
- CH1 keeps the acquisition front-end verbatim, so what is on screen is what
a scan would record
- CH3/CH4 become bias monitors sharing one scale and position, since the
comparison is by eye and only works if a division means the same on each.
100 mV/div with ground 3.5 divisions below centre puts 0–700 mV on screen
with headroom on an 8- or 10-division graticule (the signal never goes
negative, hence moving the trace down).
core/angle_inspect.py — AngleInspector, headless and Qt-free like ScanEngine.
Points are drawn from the angle's own bounding box: Y from its actual row
positions and X uniformly across its data window, so the point is somewhere
the scan would really sample rather than merely inside the box. New Point
re-rolls without rotating, which is what separates a bad spot on the sample
from a bad angle. The stage gate is held off throughout, and the rotator goes
home on stop.
gui/inspect_bridge.py — QtAngleInspector on the existing QueueWorker base.
Inspection is click-driven rather than one long run, so the worker blocks on
its queue between commands and an open window costs nothing. BBD position
polling is suppressed while inspecting, for the same reason the scan does it:
the shared TX queue.
sc3_aui_app.py — AngleInspectWindow (angle list, prev/next, New Point) driven
off the plan currently entered in the scan panel, so it inspects exactly the
scan about to be run. Navigation locks while the stage moves. The list syncs
via itemClicked rather than currentRowChanged, so echoing the worker's
position back does not re-trigger the move it is reporting.
README picks up the new modules, and scope_burst.py which the previous merge
left out of the structure listing. 114 tests passing, ruff clean.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
- Collapsed Args:/Returns:/Raises: blocks that only restated the
signature (364 lines): tektronix_base 48% -> ~20% doc density,
helios_laser and uc480_camera likewise. Only docstrings whose entire
body was those sections were touched.
- Preserved verbatim the comments that carry hardware knowledge the code
can't express: uc480's USB split-transaction contention note (with its
measured fps), the IS_ALLOW_STARTER_FW_UPLOAD segfault explanation, the
QImage-copy rationale, and tektronix's NUMFRAMESACQuired warning.
- README: project structure, quick start, and every usage example now
describe code that exists (they referenced hardware/bbd202.py,
CoherentHOPSLaser, get_curve_binary, and 'python -m scanengine.app',
none of which do). Added a headless-scan example and a read-a-scan-file
example, since reuse without the GUI is the point of the refactor.
- SETUP: structure section defers to README instead of keeping a second
stale copy; documents the vendored uEye SDK and the Genesis quarantine.
- ruff is now clean repo-wide: fixed the remaining raise-from, unused
loop variables, placeholder f-strings, and a non-strict zip; the
widget-layout semicolon idiom is an explicit config ignore rather than
22 standing warnings.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
- Merged four separate hardware control projects into unified platform
- Created unified requirements.txt with all dependencies
- Added comprehensive .gitignore
- Added project overview README
Co-Authored-By: Claude Sonnet 4.5 <noreply@anthropic.com>
Thomas Ales