A multi-angle scan runs for hours, but every angle was referenced against
one background captured before the first row of the first angle. That
reference has drifted by the last angle, and comparing angles — the whole
point of a multi-angle scan — was comparing each one against a noise floor
measured at whichever angle came first.
Every angle now captures its own. Before each angle's rows, the operator is
prompted to switch the Genesis laser off, the engine averages a fresh CH1
record, and the operator switches it back on. The data block therefore reads
[background][scan][background][scan] …, one pair per angle.
Format v7 (scan) and v11 (SAW check) carry the background inside the data
block, one length-prefixed block ahead of each angle's rows; the single
block that sat between the preambles and the data is gone. Per-angle offsets
now come from a walk of the data block at parse time rather than arithmetic
over the geometry table, and an angle whose background is not fully on disk
is the frontier — nothing of it was written yet.
v6/v10 files still read: SrasFile hands their one background to every angle,
so readers never branch on the version. Nothing writes them, and a resume
refuses them, since a re-acquired angle writes a block the old layout has no
room for. A resumed v7 angle rewrites its background in place, and the
engine checks the new block fits the room the file has before writing it —
anything else would shift every row behind it.
Two fixes made along the way:
* QtScanController never accepted file_version, so every scan launched
from the app raised TypeError at construction.
* angle_status() left its cursor parked at the frontier, so every angle
past it reported the frontier's own data_offset — which handed a resumed
scan the same write position for several angles. Two recorded offsets in
tests/golden/sras_expected.json are corrected accordingly.
The v6 goldens stay as parser fixtures; the writer is now locked against
bytes the test lays out from scan_format.md itself.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
gui/qt_workers.py — one QueueWorker base replaces the per-device command
queue + dispatch + signal boilerplate. The loop blocks on the queue
instead of waking 10-20x/second forever (test_idle_worker_does_not_spin
asserts an idle worker burns ~no CPU). PollingQueueWorker adds
self-rescheduling polling: the next poll is queued only after the
previous finishes, so a device slower than the interval can't accumulate
a backlog (test_polling_never_overlaps_or_backs_up).
Helios responsiveness — the concrete bug that motivated the above: a free
running 1 s QTimer queued a status poll that took ~2 s, so the queue grew
for as long as the panel stayed connected.
- helios_laser._query reads until the CR terminator instead of sleeping a
fixed 0.05 + 0.2 s per query
- one _query_int() helper replaces five copies of parse-with-logging
- polling is now driven by the worker; HeliosWindow's QTimer is gone
- dropped __del__, which disabled the laser and wrote to the serial port
from the garbage collector at an unpredictable time
helios_test_app.py — the worker was moveToThread'd but every call site
invoked its methods directly, so all serial I/O (including the sleeps)
ran on the GUI thread; Query All froze the UI for ~2 s. Calls now go
through a queued signal to a pyqtSlot. Also: connect/disconnect cycles
leaked a QThread + worker + 9 connections each time; 16 copies of the
not-connected guard collapse to _require_connection(); the Query Power
button called a method that has never existed (AttributeError popup) and
is now disabled and documented in KNOWN_ISSUES.
DCBiasImageWidget preallocates its image and uses set_data/set_clim, so
the live preview stops rebuilding the array and the whole artist tree per
row (O(rows^2) over a scan).
bbd20x: connect() now raises when no bays respond instead of reporting
success on the wrong port; disconnect() joins with a timeout so a wedged
reader can't hang shutdown; one _channel_for() helper replaces four
copy-pasted axis mappings; hardcoded travel limits become TRAVEL_MM; the
joke error strings are gone.
gui/widgets.py adds the shared ConnectionBar / PortSelector / bounded
LogConsole / StatusGrid for the test benches to adopt. 65 tests passing.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
- uc480_camera: drop never-called _capture_paused/get_framerate (the
hardware question _capture_paused encoded is now in KNOWN_ISSUES.md)
- t3r_protocol: drop read_reg/write_reg/decode_reg/Reg (commands never
wired into the driver)
- bbd20x: drop _update0x0212 (never dispatched) and 8 of 9 unused
trigger convenience wrappers; apt_constants: drop TriggerBitsStepper
(servo-only rig)
- ruff --fix: 35 unused imports across all apps; drop unused T3R_BAUD
- genesis_core.py: quarantine warning header; docs/genesis_verification.md
bench checklist for the 7 divergences vs tools/genesis_laser_gui.py
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Thomas Ales